Wildcard Mask Calculator
Convert subnet masks to wildcard masks and instantly generate ready-to-use Cisco ACL and OSPF router syntax.
Subnet Mask
Wildcard Mask
Cisco IOS Configuration Examples:
Privacy & Security: All IP and subnet computations run 100% client-side inside your browser. No IP addresses or topology data are ever transmitted to any server.
Network Engineering Toolset
All calculations execute client-side in your browser.
01
IPv4 Subnet Calculator · Network address, broadcast, usable host range, and 32-bit binary breakdown.
Open →
02
CIDR Cheat Sheet · /0 to /32 complete subnet mask cheat sheet with host capacities.
Open →
03
VLSM Calculator · Variable-length subnetting (VLSM) with zero conflicts and CSV export.
Open →
04
VLAN & Subnet IP Planner · VLAN IPAM planner with gateway allocation, overlap detection, and CSV/JSON export.
Open →
05
Subnet Divider · Split any network into equal subnets or target CIDR prefix.
Open →
06
Route Summarizer · Aggregate multiple contiguous subnets into minimal supernet CIDR routes.
Open →
07
IP Range to CIDR · Convert arbitrary start and end IP addresses into minimal CIDR blocks.
Open →
08
IP in Subnet Checker · Test whether an IP address belongs to a subnet and identify its network role.
Open →
09
IPv6 Subnet Calculator · IPv6 prefix math, BigInt total addresses, RFC 5952 compression, and reverse DNS.
Open →
11
IP Format Converter · Convert dotted decimal, binary, hex, 32-bit integer, and reverse DNS notation.
Open →
Frequently Asked Questions (FAQ)
What is an inverse wildcard mask? →
A wildcard mask is the bitwise NOT inversion of a subnet mask. For example, 255.255.255.0 inverts into 0.0.0.255, where 0 means "match exact bit" and 1 means "ignore bit".