IP Range to CIDR Converter
Convert any arbitrary start and end IP address range into the minimal set of CIDR blocks.
Covering CIDR Blocks
Privacy & Security: All IP and subnet computations run 100% client-side inside your browser. No IP addresses or topology data are ever transmitted to any server.
Network Engineering Toolset
All calculations execute client-side in your browser.
01
IPv4 Subnet Calculator · Network address, broadcast, usable host range, and 32-bit binary breakdown.
Open →
02
CIDR Cheat Sheet · /0 to /32 complete subnet mask cheat sheet with host capacities.
Open →
03
VLSM Calculator · Variable-length subnetting (VLSM) with zero conflicts and CSV export.
Open →
04
VLAN & Subnet IP Planner · VLAN IPAM planner with gateway allocation, overlap detection, and CSV/JSON export.
Open →
05
Subnet Divider · Split any network into equal subnets or target CIDR prefix.
Open →
06
Route Summarizer · Aggregate multiple contiguous subnets into minimal supernet CIDR routes.
Open →
08
IP in Subnet Checker · Test whether an IP address belongs to a subnet and identify its network role.
Open →
09
IPv6 Subnet Calculator · IPv6 prefix math, BigInt total addresses, RFC 5952 compression, and reverse DNS.
Open →
10
Wildcard Mask Calculator · Subnet mask to inverse wildcard calculation with Cisco IOS ACL & OSPF commands.
Open →
11
IP Format Converter · Convert dotted decimal, binary, hex, 32-bit integer, and reverse DNS notation.
Open →
Frequently Asked Questions (FAQ)
Why convert IP ranges to CIDR blocks? →
Most firewalls, cloud security groups, and routers require CIDR blocks rather than arbitrary IP ranges for policy rules.